top of page
2) Selection of GAA CNC or GAA PNEUMATIC
a) GAA CNC. feeder with ballscrew (700mm) and servomotor.
This version allows to include more axis on the machine, for example Y axis on the vertical drilling unit.
The machine works also with touch screen panel and accepts library of parts and creation of cutting lists.
It is possible to program multiple holes per piece.
The machine can cut to any length as the feeder can reposition multiple times.
b) GAA Pneumatic. Feeder with 300 or 500mm hydro pneumatic cylinder.
This machine does not work with CNC controller and touch screen panel.
The adjustments is manual with piece counter.
The feeder stroke is limited to two in the standard version and nine strokes as optional.
The quantity of holes / drills is limited to one.
3) Selection of the drilling unit
There are three available drilling units.
a) TR12, Hydropneumatic drilling unit. Drilling up tp diam.12 and M10 tapping.
b) TR20, Hydropneumatic drilling unit. Drilling up tp diam. 20 and M16 tapping.
c) T14 SERVO, Servo drilling unit. drilling up to diam. 16 and M12 tapping. *only in GAA CNC
a)
TR12
b)
TR20
c)
T14 SERVO
4) Select the position of the drilling unit
a)Vertical
b)Horizontal *The Horizontal drilling unit can be manually tilted from 0º to 65º
c)Frontal * The FRONTAL drilling unit withdraws automatically to let the piece fall
a)
b)
c)
5) Combine or add drilling units
a)TR VERTICAL + TR HORIZONTAL
b)TR VERTICAL + TR HORIZONTAL + TR FRONTAL c)TR VERTICAL + TR FRONTAL
d) TR HORIZONTAL + TR FRONTAL
a)
b)
c)
d)
6) Add servo axes on the drilling units
a) TR VERTICAL + Y AXIS
b) TR HORIZONTAL + Z AXIS
a)
b)
7) Add automatic loader and automatic unloading table with extractor of pieces
a) Automatic loader of profiles into the GAA machine
b) Automatic unloading table with extractor of pieces
bottom of page